Breeding methods and matters needing attention of White Beauty

I. Matrix

To maintain this plant, the choice of substrate is very important. Generally, you can choose to mix perlite with some peat, and finally add cinder, according to the proportion of 1:1:1. In order to avoid contact between the plant and the surface of the soil, we can cover the surface of the mud layer with relatively clean river sand or pumice. The choice of river sand is 3 to 5 mm.

2. Moisture

If you are replenishing water, you need to wait for the soil to dry before dripping.

In summer, you can replenish it with water 3 to 4 times a month, slowly dripping down on the edge of the basin, and you must pay attention to the amount of water when you are drenched. There can be no stagnant water in the basin, but the soil should not be too dry. If there is stagnant water, it will cause the roots to rot, and if it is too dry, it will cause the leaves of the plant to shrivel up.

In winter, once the temperature is below 3 degrees, the amount of water will be gradually reduced and the basin soil will be kept dry below zero.

This plant can grow in the absence of light, but it cannot accept cold climates.

Third, sunshine

It most likes to grow and develop under sufficient sunlight, and if there is no obvious dormancy period, it can be maintained all day long. However, when the summer temperature is too high, it will also be dormant, so at this time, we should pay attention to reducing the replenishment of water, strengthening the circulation of surrounding air and paying attention to shading it.

IV. matters needing attention

This plant can grow without much water, but if it is raised outdoors, you need to be careful not to let the rain fall on it, lest the white powder on the leaves fall, which will greatly affect the ornamental.