How to change the basin of the latest Douban green? The method of changing the basin of Douban green

The green change of Douban should be carried out in spring or autumn. First of all, we have to find a new basin for it, and then put a few pieces of broken pots in the drainage hole, then take out the plant with soil balls from the original basin, remove the excess soil and rotten roots, then rinse and dry, and then plant it in a new pot. finally, we have to pour water once, and water has to flow out of the drain hole.

When is the best time for Douban green to change pots?

For this kind of plant, we'd better change the pot in spring and autumn. Because, in summer, the temperature is relatively high, the plant will easily rot roots. If the temperature is very low in winter, it is even more inappropriate.

Second, the specific steps of changing the basin of Douban green:

1. Cushion basin: first of all, we can choose a new pot for the plant. Then, put a few pieces of broken basin on the drain hole at the bottom of the basin. Controls the concave surface of the fragment downward. The number of fragments doesn't need to be too much, just three or four pieces. Then, add some coarse-grained matrix.

2. Pour the pot: this step refers to pouring out the edge of the original pot in the plant. However, you should be careful not to water it before, but to keep it relatively dry. In this way, it is easier for the earth ball to come out completely when it is poured. Dump the flowerpot, hold it with one hand, and knock on the edge of the pot with the other, so that the plant and the soil ball come out smoothly.

3. Clean up: get rid of the excess soil balls. In addition, those senile roots and diseased roots also need to be removed. If there are some new white roots, it can be completely changed into a new flowerpot. After dealing with these, we need to rinse them and put them in a cool place. Wait until it is completely dry, then proceed with the next operation.

4. pot: hold the plant by hand and put it in the center of the new flowerpot. Control the depth, and then slowly add matrix to it. Until the pot is full, shake the flowerpot and press the matrix with your fingers so that it is one to two centimeters away from the edge of the pot.

5. Management: after all the above steps have been completed, we need to call it enough water. Pour it until it flows out from the bottom of the hole. In addition, shading is a necessary measure.