MySheen

Which brand is good for imported rice transplanter? What are the advantages?

Published: 2024-11-21 Author: mysheen
Last Updated: 2024/11/21, Now everyone likes foreign brands when buying things, and they will also encounter these problems in purchasing agricultural machinery. Which brand should I import rice transplanter? This requires everyone to proceed from their specific needs, such as what price, what country they come from, high speed or ordinary.

Now everyone likes foreign brands when buying things, and they will also encounter these problems in purchasing agricultural machinery. Which brand should I import rice transplanter? This requires everyone to proceed from everyone's specific needs, such as what price, what country, high speed or ordinary? As long as it is considered from the actual situation and then through the comparison of various brands, it is the best to meet their own needs.

What are the advantages of imported high-speed rice transplanter?

1. High content of science and technology

The imported high-speed rice transplanter has realized the integrated design of machinery, electricity and hydraulic. it can be called the leader in the world in transplanting machinery, and its advanced performance is incomparable to that of the current domestic rice transplanter.

two。 The operation is simple and the design is humanized

Such as the use of combination folding type fast hanging seedling box; reverse gear automatic rise and fall; pedal type walking stepless speed change; omni-directional monitoring instrument device, etc., so that the driver can easily complete the high standard transplanting operation.

3. Strong passing ability and high operation efficiency

The imported high-speed rice transplanter adopts more than 20 horsepower engine, four-wheel drive and hydraulic power steering, and the plough layer can work easily within 50 cm. The highest working speed is 1.6 meters per second, and the actual work volume per hour is 812 mu.

4. High operating standards and strong adaptability

The automatic balancing device of seedling box is adopted in all the imported high-speed transplanters; the automatic adjusting device of oil pressure, high-standard combined seedling press, long belt longitudinal seedling feeding device, new combined seedling protection device and advanced sub-transplanting mechanism are designed according to the soft and hard degree of the field surface. it fully ensures that the transplanter can quickly send seedlings in place, gently pick and plant seedlings, and transplant them straight without hurting them. Compared with other domestic transplanters, the transplanting quality is higher, the seedling injury rate is lower, and the adaptability is good.

5. Simple adjustment and convenient maintenance

For example, the number of horizontal seedlings, the amount of vertical seedlings, hole distance, planting depth and other indicators can be quickly adjusted at any time. The maintenance part is less, and the mark is obvious, easy to operate.

Application experience of imported rice transplanter

1. How to change the chain

After 2 years of operation of Korean international brand rice transplanter, there is often the phenomenon of axle chain box breaking chain. The reason is that the chain pitch increases due to wear, and the transmission is stuck at a discount. Axle chains are expensive and difficult to install. Many operators cut off the axle chain box laterally and then weld the chain after changing the chain. The disadvantages of this method are that the chain box is easy to deform after welding, the coaxiality difference between the two ends of the shaft and the support strength are not enough. In fact, the following simple ways to change the chain can be adopted:

Pull out the broken chain, or pull the small shaft end of the axle chain box up to make the chain leak out of the lower axle hole and pull out the broken chain.

Make the axle chain with the axle hole facing up, and put one end of the new chain in from the hole.

Turn the lower sprocket shaft until the chain is bitten by the sprocket.

Turn the axle chain box axle end up and continue to rotate the sprocket axle.

When both ends of the chain are in the position of the shaft hole, connect it.

two。 Oil should be used in hydraulic system according to regulations.

An Assyria transplanter was normal at the beginning of its operation, but then it took off and fell more and more slowly, and finally it could not rise. It is improved after cleaning, but it is still not sensitive. There is no problem in checking the oil circuit and each valve, but there are aluminum alloy fragments in the hydraulic oil. Disassembling the gear pump for inspection, it was found that the gear scratched the shell and the alloy debris blocked the oil outlet. The analysis shows that the fault is caused by improper use of oil.

3. The transporting pump of seedling box should be checked regularly.

An Asia brand transplanter purchased in 2002, when transplanting seedlings in the spring of 2004, it was found that the seedling volume was small and the seedling box moved slowly, which could not be solved after many adjustments. The analysis shows that the slow movement of the seedling box is the key reason. After disassembling and checking the hydraulic lateral transfer pump, it is found that the plunger of the transfer pump is worn and the output oil is small. Thus it can be seen that the working condition of the transporting pump of the seedling box should be checked regularly.

4. Pay attention to lubrication and operation of ribs

The control ribs include oil ribs, main clutch ribs and steering clutch ribs. It is common that when the rice transplanter is working in the second year, it becomes rusty and stuck due to the operation of the straining sleeve into the water and mud, which affects the normal operation. Therefore, at the end of each operation period, the engine oil should be dripped from the upper part of the rib sleeve, and the control mechanism should be pulled frequently until oil droplets appear in the lower part of the rib sleeve.

5. The transmission belt should be removed for safekeeping.

The operation of an Asia brand transplanter was very normal in the first 2 years, and it obviously felt that the speed of the planting arm decreased or even did not rotate in the third year, and there was no obvious effect in many debugging. Open the continuously variable transmission belt cover plate for inspection, and found that the transmission belt skidded seriously. Experience shows that continuously variable transmission belts must be removed for safekeeping at the end of each operating season, tension should be checked during installation in the second year, and should be replaced if necessary.

6. High-grade unleaded gasoline should be used

The commonly used gasoline engine on the imported rice transplanter has no gasoline filter parts. if unclean low-grade gasoline is used, impurities will form carbon deposits at the air inlet, making the valve cushioned or stuck. In serious cases, the gasoline engine will fail after working for five or six days. According to the requirements, imported rice transplanters must use pure high-grade unleaded gasoline.

 
0