What matters should be paid attention to when using a small sprinkler machine?

Small sprinkler irrigation machine should do a series of preparatory work before use, and pay attention to a lot of things when using it. And real-time maintenance and maintenance in order to give full play to the role of light and small sprinkler. What should be paid attention to when using the small sprinkler machine?

Small sprinkler irrigation machine is mainly used to irrigate mountain hills and plain fields, suitable for all kinds of crops and soil, and plays an important role in water-saving irrigation equipment.

1. The users must be familiar with the composition of the sprinkler irrigation unit, the structure and performance of the sprinkler, and check the components, including pumps, pipes, sprinklers, etc., one by one, and observe whether the parts are complete and whether the technical status is normal. If damage or shortage of parts is found, it should be repaired or configured in time to keep the system in good technical condition.

2. The soil in the working position should be solid to prevent collapsing or sinking into the ground.

3. When installing the inlet pipe, attention should be paid to prevent water leakage and air leakage. The filter screen should be completely submerged in the water, its depth is about 30cm, and keep a certain distance from the bottom and wall of the pool, so as to prevent the inhalation of sediment and other impurities and air.

4. Before starting the centrifugal pump, fill the pump with water and wait for the water to fill the inlet pipe and the pump body before starting; the water storage of the self-priming pump should be above the axis of the impeller to ensure the normal self-priming process.

5. Support the spray rack on the ground, position the end face of the spray frame joint horizontally as far as possible, so that the nozzle rotates evenly, and then fix the spray rack. Install the sprinkler on the spray rack, check whether the rotation of the sprinkler is flexible, the tightness of the rocker arm is appropriate, add an appropriate amount of lubricating oil in the rotating part, and then wipe the quick joint clean and connect.