What should I pay attention to before using the flip plow? What is the knowledge of safe operation?

Mechanical accidents often occur, some farmers may not pay attention to cause accidents, as agricultural machinery overturning plough must also achieve safety in production and construction. Follow the editor to know what you need to pay attention to before using the flip plow. What is the knowledge of safe operation?

The adjustment work you need to know before using the flip plow.

First of all, adjust horizontally and adjust the level of the headframe crossbeam of the overturned plow. The unit is parked on the horizontal ground. Rotate the handle on the tractor boom to lengthen or shorten the length of the boom so that the cross beam of the suspension frame is parallel to the ground. The height of the crossbeam from the ground is determined according to the specific ploughing depth. The greater the ploughing depth, the lower the crossbeam. Then adjust the level of the flipped plough frame. The method is to adjust the adjustment bolts at both ends of the plough suspension head frame (and some in other parts) so that the height of the left and right bolts protruding from the crossbeam is the same. The protruding height value depends on the specific ploughing depth, and the greater the ploughing depth, the more protruding. Through the above adjustment, the horizontal level of the plow has basically been guaranteed.

Secondly, the longitudinal water increase adjustment, after the completion of the horizontal water leveling adjustment of the overturned plow frame, it is necessary to adjust the vertical level of the plow frame in the trial ploughing. In the trial ploughing, observe whether the large frame (or inclined beam) of the plow is horizontal, if it is high in front and low in the back, which makes it difficult for the large frame of the plow to enter the soil or plough too shallow, the upper pull rod should be shortened; on the contrary, the upper pull rod should be extended. At this time, it should be noted that the longitudinal horizontal adjustment is carried out on the premise of ensuring the horizontal horizontal state after the horizontal horizontal adjustment is completed, and the adjustment is limited to the adjustment of the pull rod. If the length of the lower pull rod of the flipped plough is adjusted to change, it is bound to cause horizontal damage to the plough frame of the whole machine. At this time, even if the plough frame reaches the horizontal state in one farming state (such as turning right), it is difficult to guarantee that the plow frame can be horizontal in another farming state (left turn).

Finally, the tillage depth adjustment, if it is a height adjustment to control the plough depth, it is necessary to adjust the ground wheel screw to adjust the tillage depth. The turning plow and the hydraulic turning plow control the ploughing depth left and right through the rotation work of a single plough, so the adjustment of the ploughing depth is relatively simple, as long as one side reaches the predetermined ploughing depth, the ploughing depth of the other side is guaranteed. However, some plough types control the left and right ploughing depth through double ploughs, and the ploughing depth of these ploughing types should be adjusted separately.

Knowledge of safe operation of overturning plough machinery

1. First of all, it is necessary to implement the principles of "safety for production, safety must be ensured in production" and "fair use, safety first"; to establish a full-time safety organization with full-time personnel in charge of machinery safety management.

2. When working on mechanical equipment such as flipping ploughs, operators are not allowed to leave their posts without authorization, are not allowed to hand over mechanical equipment to non-local personnel for operation, and irrelevant personnel are strictly prohibited from entering the machinery operation area and operation room. When working, the mind should be concentrated, and drunken operation is strictly prohibited.

3. Drivers should be trained before taking up their posts, and relevant personnel should be hired to train mechanical drivers in theoretical knowledge, such as general knowledge of machinery and basic knowledge of various mechanical operations, so that mechanical drivers can understand the general theoretical knowledge of mechanical operation, repair and maintenance, so that mechanics can be familiar with the general characteristics of machinery, timely maintenance and repair of machinery, and reduce the occurrence of accidents.

Flip plow machinery and equipment, like other mechanical equipment, also need to maintain safe production and construction, so we should also strictly follow the requirements of production and processing to ensure safe construction and improve the efficiency of machinery.