MySheen

Culture methods of succulent plants in Tang Yin

Published: 2024-11-21 Author: mysheen
Last Updated: 2024/11/21, Before raising succulent plants in Tang Dynasty, flowerpots and pot soil must be selected. Generally, flowerpots with wide mouth are the best, and the soil is planted with sandy soil with good drainage. Watering should not be too frequent, the general basin soil can be poured thoroughly when dry, but do not accumulate water, so as to avoid rotting roots. Qi

Before raising succulent plants in Tang Dynasty, flowerpots and pot soil must be selected. Generally, flowerpots with wide mouth are the best, and the soil is planted with sandy soil with good drainage. Watering should not be too frequent, the general basin soil can be poured thoroughly when dry, but do not accumulate water, so as to avoid rotting roots. The temperature is controlled at about 15-20 degrees, no less than 5 degrees in winter, and then it can be cultured successfully in a place with light.

Tang Yin succulent how to raise fast burst pot?

1. Lighting

The growth of Tang Yin needs sufficient light, a relatively dry environment, and can withstand the semi-shady environment at the same time. Grow in the cool season, but stop growing when the summer temperature is particularly high. The period from September to June of the following year is its growing period. if you want to have the effect of an explosion, the light in this period must be sufficient, so that it will grow very short and strong, the leaves will grow relatively compact, and the visual effect will become better.

2. Temperature

Tang Yin is more able to withstand the cold, and the lowest tolerance temperature is 3 degrees Celsius to 5 degrees Celsius, but in order to achieve the effect of exploding the basin, the temperature must be controlled artificially, so that it can not be frozen or hungry can make the temperature too high. Otherwise, it will cause its plants to stop growing. When the temperature is low in winter, you need to give enough sunshine, while in summer, the temperature is particularly high and needs ventilation to cool down.

3. Moisture

Spring and summer are the most vigorous periods for the growth of Tang Yin, which requires frequent watering to keep the soil moist, but watering should not drop on the leaves, otherwise it will affect the visual effect. There are more Rain Water in summer, so we should water less, otherwise it will cause its roots to rot. Humidity should also be watered in winter to ensure a certain degree of dryness of the basin soil, especially when the temperature is less than 5 degrees Celsius, the water will be completely cut off. Only by meeting the moisture requirements of Tang Yin, is it possible to grow to the effect of exploding pots.

4. Soil

Every spring to Tang Yin to change the basin, basin soil to choose sandy soil permeability and drainage are very good, generally recommended to use cinder and peat, perlite mixed use, the proportion is 5:4:1, and in the top layer covered with a layer of large particles of clean river sand, such a soil environment is particularly favorable for the growth of Tang Yin.

The above is the relevant introduction of the breeding methods of succulent plants in Tang Yin. I hope it will be helpful to everyone.

 
0