MySheen

Bonsai cultivation techniques of Sabina vulgaris

Published: 2024-11-05 Author: mysheen
Last Updated: 2024/11/05, The cliff cypress stump is dug before and after the Beginning of Spring, and the root system is treated and bandaged after excavation, and then the excess and broken root system can be trimmed into the basin, and the root should not be buried too deep. In the year of planting, it should be placed in a cool place and watered slightly dry.

The cliff cypress stump is dug before and after the Beginning of Spring, and the root system is treated and bandaged after excavation, and then the excess and broken root system can be trimmed into the basin, and the root should not be buried too deep. In the year of planting, it should be placed in a cool place, it is better to water slightly dry, but also to control longicorn beetles and other pests.

When making juniper bonsai, you can refer to the following methods:

1. Stratified sand hoarding in the basin

Half a basin of sand is filled in the basin, and the stump is planted into the basin according to the formal position of the pot in the future, making a square or round frame (material: wooden board, linoleum or plastic sheet, etc.). Press the large and small layers according to the dry form of the pile until the filled sand buries the head of the pile. The uppermost frame is filled with sand to 1 inch from the upper mouth for watering. Pour water to keep the sand wet. Generally speaking, the pile head of miscellaneous wood is expected to sprout for half a month to a month when it is already warm in spring. If the upper frame is removed and the head of the pile is checked for buds, the frame will not be restored. If there are no buds, the frame should be restored to continue to grow buds. This method is suitable for the survival of pile heads with few big branches and short branches.

2. the method of stratified sand hoarding above ground

It is roughly the same as the above method, but instead of using a basin, it is dug on the ground or moderately. Sand filling, pile planting, watering and inspection are all the same as in the basin, so there is no need to repeat them. If the stump is straight, there can be only one layer of tubes in the basin and on the ground, without layering.

3. The method of burying pile and half wrapping pile

After obtaining the newly excavated pile head, soak it in water for at least 2 hours, bury it in the lower half of the ground, and the upper part is wrapped in plastic sheeting to moisturize. Parcels must be strictly protected from the wind to prevent loss of water. In this way, it is easy to check whether the pile head needs to be watered or whether it has sprouted. If there is a lack of water, make up the water quickly; if you have a bud, you can untie part of the plastic sheet and make it ventilated moderately. This method is suitable for the survival of the pile head which retains some big branches.

4. Full burial above ground and underground

The lower part of the new pile is under the ground, and the upper part is buried on the ground to maintain the moisture of the floating sandy soil. it can also remove the sand cover properly, check the humidity and whether it is budding or not. This method has extensive management and is suitable for the slow survival of huge pile heads.

5. Full-buried feeding method under the soil

The new pile is buried all over the body, and only waits for survival to sprout after it is buried. This method is suitable for living at the head of a particularly large pile.

In addition to making bonsai, cliff cypress is good as root carving wood and greening tree species. In addition, I would like to remind you that in the conservation of cliff cypress, we must prune according to different ages.

 
0