MySheen

How to ventilate the pig shed

Published: 2024-12-23 Author: mysheen
Last Updated: 2024/12/23, An air vent can be made on the top of the greenhouse, and the turbid gas can be discharged very well.Some old-fashioned greenhouses are shorter, and the exhaust vents have to be opened wider to have an effect; pull the greenhouse open for a period of time every day and let the natural air in. When the temperature in the greenhouse

Can be done in the top of the greenhouse an exhaust vent, you can be very good inside the turbid gas exhaust out, some old-fashioned greenhouses are shorter, exhaust vent to open a larger number of effects; every day the greenhouse will be opened for a period of time, let natural air in, when the temperature in the greenhouse exceeds 28℃, you need to open the greenhouse exhaust vent more, more conducive to ventilation and heat dissipation.

Nowadays, when many people raise pigs with seeds, in addition to using houses to raise pigs, greenhouse pigs are also very common. Inside the pig shed, it is necessary to do a good job of ventilation management, so that it will be more conducive to its growth, you can make an exhaust vent at the top of the shed, this is the most common method.

1, the general new greenhouse, the height is relatively high, in the above to make an exhaust port, can be very good inside the turbid gas exhaust. The old-fashioned greenhouse is relatively short, and its effect is not very obvious, so the exhaust outlet that needs to be opened should be larger, which should be noted.

2, need to open the greenhouse for a period of time every day, this is conducive to the discharge of some bad breath inside it, let the natural air and so on. If the temperature exceeds 28 ° C, it is necessary to open more exhaust outlets inside it, so that there is also the effect of ventilation and heat dissipation.

3. In addition to ventilation, it is also necessary to pay attention to wind protection at ordinary times. When windproof, you can use more rope to fix, knot to tie well, slipknot is not recommended, because it is easy to spread, it is not good for its fixation. The best is to use nylon rope to make, this its strength and friction resistance is higher, can be used for a longer time. Usually also need to timely inspection, in order to avoid loose places.

 
0