MySheen

The method of succulent reproduction of jade butterfly what to do about the fleshy leaves and leaves of the butterfly

Published: 2024-11-05 Author: mysheen
Last Updated: 2024/11/05, There are many ways to reproduce succulent plants, but different succulent plants have different temperament, so we need to adopt appropriate breeding methods for different succulent plants, so as to help succulent plants reproduce more smoothly. So what should we use for the succulent butterfly?

There are many ways to reproduce succulent plants, but different succulent plants have different temperament, so we need to adopt appropriate breeding methods for different succulent plants, so as to help succulent plants reproduce more smoothly. So what kind of way should we adopt for the succulent butterfly?

The method of succulent reproduction of jade butterfly

1. Leaf cutting

Jade butterfly leaves to choose thick leaves, try to choose the middle part. The leaves were cleaned and inserted directly into the soil after disinfection, but the growth time was slow and the survival rate was low. It's better to suggest cutting branches.

2. Branch cutting

Jade butterflies like to grow in groups, and can grow many plants in one pot, so they can directly cut off their heads and reproduce.

A lot of small heads will grow under the adult jade butterflies. Pour a little water a few days before preparing for cutting and break off the small heads directly. Pay attention to break decisively and reduce the area of the wound.

Put the broken head in a cool and ventilated place to dry for a day, and you can plant it directly! Planting should not be too deep, 1 cm to 2 cm.

After planting in a pot, don't water it for a month, wait for the root to grow, and then water it. Move the small basin to a ventilated and bright place to avoid excessive light, which will reduce the survival rate if the light is too strong or too dark. After the seedlings grow out, you can increase the light.

What about the succulent leaves of the jade butterfly?

The cracking of the leaves of the jade butterfly is mainly due to the large water and the lack of light, which is not a big problem. Flower friends only need to control the water in time, humidity and light can alleviate the cracking of the leaves, but the broken leaves cannot be restored.

Maintenance skills of Jade Butterfly in Winter

1. The light of the jade butterfly over the winter

The fresh and tender flesh of the jade butterfly needs sufficient light to maintain. Be careful to give it enough sunlight in winter, and if you have plenty of time, you can adjust the position of the plant throughout the day to receive light throughout the day. If the light is not enough, the plant type of jade butterfly is loose, the leaf is slender and the color is dim.

2. The winter temperature of the jade butterfly

The cold resistance of jade butterfly is weak, so it should be moved to indoor maintenance when the outdoor temperature is lower than 10 ℃. The lowest indoor temperature should not be lower than 5 ℃. Try to choose to put it in the Xiangyang room.

3. The watering of the jade butterfly in winter

Watering was reduced in winter, but when the temperature dropped to 5 ℃, the water began to be cut off. The time of watering is also clearly stipulated, and try to choose the period with higher temperature at noon.

4. Fertilization of jade butterfly in winter

The growth of jade butterfly does not need too much nutrients, and it is the same in winter. It can survive the winter safely without fertilization.

5. The basin soil of the jade butterfly in winter

The jade butterfly usually needs to change the soil every 1-2 years. The soil must choose the one with better exhaust. Especially in winter, to choose a strong anti-freezing soil, to avoid soil freezing damage plants!

Summer maintenance skills of Jade Butterfly

1. Temperature

This is, of course, one of the biggest headaches. High temperatures in summer, especially in areas closer to the south, must be dealt with. Although in theory, plants can tolerate temperatures of more than 40 degrees, it is always bad for plants, and the time should not be too long. Therefore, it is safer to keep the temperature below 35 degrees. Those hot and humid areas in the south need to pay special attention to moving the plants indoors.

2. Lighting

This kind of plant likes light, but it can't receive all-day light in summer. When it is close to noon, remove the outdoor plant or give it shade. It can be illuminated in the morning and afternoon. Just observe the intensity of the sun.

3. Humidity

This factor must be strictly controlled, if you want to ensure the safety of plants in the summer, how to control the humidity below 60%. Watering is also mentioned here. We also mentioned earlier that the humidity should not be too high, so the frequency of watering should not be too high. When watering, of course, it can be watered through, but do not let the soil stay wet for a long time.

4. Ventilation

This is very important for plants to get through the summer safely. The provision of fresh air is secondary, and it can also reduce the humidity of the air. If there is no wind, it can also be blown by an electric fan, and the effect is the same.

5. Picking leaves

To better ensure that plants spend the summer, diseased and withered leaves can be removed. Second, cut off the aged leaves as much as possible.

Most of the problems with succulent plants are likely to occur on light and water, so when we encounter the problems of succulent plants, the first thing we have to think of is the problem of light and water, followed by ventilation. The maintenance in different seasons is mainly due to the changes in these aspects.

 
0