MySheen

How to smoke garlic moss

Published: 2024-11-23 Author: mysheen
Last Updated: 2024/11/23, Bolting of garlic is usually carried out in early May, and watering should be stopped 10 days before bolting. Specific method: you can cut the false stem with a knife, cut off the bolts and pull out the bolts, then twist the garlic leaves to cover the wound, or pull out the garlic bolts directly by hand, but it is better to draw garlic bolts by hand than with a knife.

Bolting of garlic is usually carried out in early May, and watering should be stopped 10 days before bolting. Specific method: you can cut the false stem with a knife, then cut off the bolting, then twist the garlic leaves to cover the wound, or pull out the garlic bolting directly by hand, but the yield of bolting by hand is lower than that cut by knife, and you need to have certain skills, if conditions permit, you can also buy a bolting device for bolting, this method is fast and without scars.

First, how to smoke garlic moss

1. First cut the false stem with a knife, then cut off the bolt and pull it out, and then twist the garlic leaves to cover the wound.

2. Garlic bolts can also be pulled out directly by hand. generally, the yield of garlic bolts by knife cutting method will be higher, but the wound is easy to rot after being drenched in the rain, while the yield of garlic bolting by hand is relatively low, and some skills are needed. Therefore, the number of people who use this method is relatively few.

3. Generally, you can choose to extract garlic bolts in the afternoon, during which you need to pinch them by hand at the base of the garlic seedlings, or use nails to pierce the base of the garlic seedlings and then extract them. In this way, the garlic bolts are longer and the wounds caused to the garlic seedlings are relatively small. It is more conducive to the growth and development of garlic.

4. Garlic bolts begin to differentiate to harvest, the time is about 40-45 days, the early growth is relatively slow, and after tail flick, the growth will be relatively fast. When most garlic bolts in the field take out about 25cm, the involucre begins to turn white, and the garlic bolts just begin to bend, the harvest can be carried out in time.

5. The harvest time of garlic bolts should not be too early or too late. Early harvest will reduce the yield, and the fiber will grow too late, and the quality is poor. Generally, the garlic bolts can be harvested in the first ten days of May and can be harvested 1-2 times with neat growth. 10 days before bolting, it is necessary to stop watering to promote the proper loosening of garlic bolts and leaf sheaths so as to facilitate the picking of garlic bolts in the later stage.

6. Garlic bolts can be harvested when the leaf sheath 6-8cm is exposed. Garlic bolters can also be used for bolting, which is fast and without scars. During this period, the garlic bolting exposed leaf sheath can be grasped with the left hand, and the bolting device can be held in the right hand to hold the garlic bolting at the leaf sheath mouth, and then rowed downwards, tilting inward from the left and right of the ground 5cm, and lifting it with the left hand, the garlic bolting can be pulled out.

7. After harvest, soft rope can be used for binding, each bundle is 0.5-1.0 kg. After binding, it can be stored in a shady place.

Second, how to bolt more garlic

1. after sunrise, cover the garlic plant with plastic sheet. after waiting for 2-3 hours, the garlic plant begins to become soft, you can hold the garlic bolting cap with your right hand, and then lift it up to pull out the garlic bolting, so that the garlic bolting is straight and long.

2. After pumping, you can go forward with plastic sheeting, and then cover a piece of land in front. This method is higher than that of bolting garlic without plastic sheeting. Generally, the garlic bolting per mu is at least more than 25kg, and the garlic bolting is not easy to bend or break, and there is no need to shake the tail, so the operation is more convenient and simple.

 
0